An 8 button DMX controller for simple push-button control of RGB LED lighting.
Each channel can be independently controlled using the R G and B buttons to cycle through level settings.
3 preset RGB colours can be stored for fast access to favourites. There is also the option for an RGB colour cycle that steps through the colour pallet at a variable speed.
A front panel mounted RGB LEDs shows the currently selected colour.
Configuration allows preset saving to be disabled.
For more information on the DMX channel allocations and operating modes please see the Operations manual in the Downloads section.
Frequently asked questions
Setup Mode
‘ SETUP MODE – This allows us to set or change the configuration of the wall plate
‘ using a simple 4 question, 4 answer options page.
‘ This setup mode is entered by pressing and holding the OFF button for 20 seconds.
‘ Options are selected using the left side buttons, with the right side
‘ showing the selected mode within that option.
‘Button Name Notes
‘1 – ‘RED’ DMX Mode Sets DMX channel output mode – defaults to Mode 1 (Bluecog 4 Preset)
‘2 – ‘GRN’ Chase Mode Preset 1 becomes a stepped RGB colour roll – S/M/F
‘3 – ‘BLU’ Store EN Sets option to enable Preset storage – defaults to ON
‘4 – ‘OFF’ Exit Hold for 5 seconds to store and exit setup mode
Available DMX Output Modes:
DMX Mode 1 – 4 Preset with R G B DMX Mapping. All other channels are set to 0.
DMX Mode 2 – 3 Preset with RGB mapping and Sound to Light Mode active on Preset 4 – requires Audio triggered DMX fittings
